banner

Cast-iron energy-efficient & thermodynamic fireplace HKD 2.2 f/s straight sliding door

Code: HKD-2.2-fs

Cast-iron energy-efficient & thermodynamic fireplace  HKD 2.2 f/s straight sliding door

Cast-iron hearth with cast-iron detachable Φ180 cone. A damper can be fitted to the cone for manual adjustment of the flue gas output flow.

The combustion chamber has Chamotte (compressed fire-resistant brick) lining, with high heat accumulation capacity, and the cone is shielded with isothermic material.

Straight, sliding ("easy lift" mechanism) and reclining door (klick-klack mechanism),ceramic glass (resistant to 800 Cο), and straight detachable metallic frame that ensures a perfect aesthetic result when installed.

Manual adjustment of combustion air. Supplied with metallic adjustable base.

  • Nominal thermal output : 9 kW (average value over three eight-hour periods)
  • Required combustible material : nominal load 2.5 kg/h        accumulation mode 4 kg/h
  • Combustion output (maximum) : nominal load 11 kW        accumulation mode 17 kW 
  • Flue gas mass flow: nominal load 10 g/sec        accumulation mode 17 g/sec 
  • Weight : hearth 207 kg / chamotte 58 kg
  • Germany: BlmSchV 2.stufe
  • Austria: 15aBVG
  • Switzerland: LRV

Tested according to: EN 13229W, EN 13229WA

  • INOX version
  • "EAS" electronic combustion air adjustment system 
  • "MAS" ceramic rings system for heat accumulation 
  • "KESSELMODUL” water system (heating system boiler)

MAS ceramic ring system for high heat accumulation and release thereof into the room for 3 to 6 hours after the fireplace has been put out (lower temperature of flue gas by approximately 200 ΟC during output).

Water assist system (radiator) that transfers 30% of the produced heat to the water and increases hearth output by approximately 7 kW.

Flue gas damper

Panel from the EAS automatic combustion air supply adjustment system.